Automatic Precipitation Sampler DRA-12

Specifications

Sampling

• Bottle changer configuration: 32x250ml or 12x1000ml, others on request
• Capacity level sensor (liquid level sensor) for automatic bottle exchange of full sampling bottles
• Integrated cooling compressor to control temperature of collection room,
  temperature can be set (e.g. 4°C+-2°C)
• Adjustable delay time for the opening of the lid, user settable, 1s-60min
• Adjustable delay time for the closing of the lid, user settable, 1s-60min
• Precipitation sensor heating  as a standard
• Funnel opening (internal diameter (mm)) /sampling area 252mm +- 1mm / 500cm2
• Average precipitation amount for initial monitoring 0.01mm
• Application range: -20° to 50°C; 0 % to 100 % RH, with additional heater for temperatures <0°C

Time programs

• Work, Pause (0 to 99’999 minutes each)
• Start time adjustable, using date and time
• Different sampling cycles programmable

Protocol files

• Protocols of lid opening and closing times, sampling time, error messages, temperatures
• If options are connected: protocol of Option’s outputs (pH, conductivity, temperature, amount, intensity)

Operating Data

• Power supply: 230V AC / 50-60 Hz; max. 300 VA
• Sensors: Ambient pressure, temperature, humidity, bottle storage temperature

Interfaces

• RS232C, USB, Ethernet, RS485
• Interface protocols: DIGITEL, Bayern-Hessen, AK, TCP/IP, HTTP, FTP
• Internal memory: 16MB, ring buffer, filter data of two years of daily sampling

Materials

• Coated aluminium
• Material of sampling line:  PTFE coated aluminium / PTFE
• Material of bottles: PE, other materials (glass) on request
• 60mm XPS insulation

Dimensions

•  640 x 640 x 2200 mm, 80 kg
• Height of inlet from ground (m): As a standard 2.16m, available 1.5-2.5

Noise level

•  <35dB at 1m